5B Integration Card Specifications - HBM Genesis GEN5i User Manual

310

5B Integration card Specifications

General Specifications
5B Modules
Voltage rails
Microphone input
Note The card has mounting holes for two Vision demo cards (signal generators).
For demo purposes only.
Note The card alone does not serve any function and must be combined with 5B
modules, proper connectors have to be mounted, internal card wiring (input/
output/power) has to be implemented and additional Genesis input channels
have to be used to receive the 5B modules output signal, HBM's Basic module
series (GN810, GN811) are most suited for this task.
For further help or information on the construction of this board please contact
HBM's project group.
6 (mounting components included)
3.3 V Fused @ 2 A with soldering tabs
5 V Fused @ 2 A with soldering tabs
12 V Fused @ 1 A with soldering tabs
24 V Fused @ 1 A with soldering tabs
Signal is amplified and AC coupled to an output.
For demo purposes only
GEN5i
I2679-4.0 en