K BE3200 USB to Optical RS232 Convertor
588
K.1
Re-programming of the USB-RS232 (opt. 650nm) converter to work with
BE3200
1
Download the „FT-Prog" from:
www.ftdichip.com/Support/Utilities.htm"
This is required to re-program the internal EEPROM in the converter to
support inverted TX/RX lines (required to work with BE3200).
2
Unzip downloaded ZIP-Archive and run „FT_Prog" program. Connect
converter to a free USB connector on your PC.
Press F5 or go to the menu Devices ► Scan and Pharse. As soon as the
3
USB converter is found, the display should look like this:
Figure K.1: FTDI ˗ FT Prog (Part1)
GEN5i
I2679-4.0 en