F Rack Mount Instructions; Mount Gen5I In A 19-Inch Rack - HBM Genesis GEN5i User Manual

F Rack Mount Instructions

I2679-4.0 en
F.1

Mount GEN5i in a 19-inch rack

A 19-inch rack is a standardized (EIA 310-D, IEC 60297 and DIN 41494 SC48D)
system for mounting various electronic units in a rack, 19 inches (482.6 mm)
wide. Equipment designed to be placed in a rack is described as rack-mount
or a rack-mounted system.
The GEN5i by itself cannot directly be mounted into a 19-inch rack. For this you
need to use the optional 19-inch rack mount kit.
How to install the GEN5i rack mount kit:
Handle removal
To remove the handle do the following:
1 Remove the plastic buttons on both sides.
2 Remove the 2 screws and rivets.
3 Pull the handle carefully outwards and take the handle off towards the front.
Figure F.1: GEN5i Handle removal
A Handle
GEN5i
547