HBM Genesis GEN5i User Manual page 325

Acquisition Cards
Model Type
Basic200k Single Ended
Basic200k XT ISO Unbalanced Differential
Basic1M Single Ended
Basic1M ISO Unbalanced Differential
Basic1M XT ISO Unbalanced Differential
Bridge200k ISO Bridge/Differential
Bridge1M ISO Bridge/Differential
Uni200k ISO Differential/IEPE/Shunt
Uni1M ISO Differential/IEPE/Shunt
Differential
Basic20k-16
Differential
Basic20k-32
Differential/IEPE/Charge
HiRes250k-16
Differential/IEPE/Charge
HiRes250k-32
HiSpeed 25M Differential/Single Ended
HiSpeed 100M Differential/Single Ended
Fiber100M 6600 Multi Mode Optical Fiber
Fiber100M 7600 Single Mode Optical Fiber
Iso1kV200k Balanced Differential
Iso1kV2M Balanced Differential
Marker1M Binary
Marker1M HV Optical & Binary
(1) Maximum Sample Rate/channel (not multiplexed).
(2) Total recording memory/card.
(3) Digital Events, Timer/Counter channels (Supported by GEN2i Digital Event/Timer/Counter connector only).
(4) This card supports a maximum of four optical fiber transmitter channels.
Optical Fiber Transmitter Channels
Transmitter
Every transmitter is a single channel unit. Every unit has an unbalanced differential input, amplifier, analog anti alias filter and ADC with an
optical data and control link to the receiver card. The receiver card has the recording logic, sample rate selection and memory.
Model Receiver Card
HV6600 100M Fiber100M 6600
HV6600 25M Fiber100M 6600
MV6600 100M Fiber100M 6600
MV6600 25M Fiber100M 6600
7600 100M Fiber100M 7600
Special Function Cards
5B Integration card
I2679-4.0 en
Isolation (1)
Max. SR
no 200 kS/s
yes 200 kS/s
no 1 MS/s
yes 1 MS/s
yes 1 MS/s
yes 200 kS/s
yes 1 MS/s
yes 200 kS/s
yes 1 MS/s
no 20 kS/s
no 20 kS/s
no 250 kS/s
no 250 kS/s
no 25 MS/s
no 100 MS/s
yes 100 MS/s
yes 100 MS/s
yes 200 kS/s
yes 2 MS/s
no 1 MS/s
yes & no 1 MS/s
Power Sample rate
Battery 100 MS/s
Battery 25 MS/s
120/240 V AC 100 MS/s
120/240 V AC 25 MS/s
External 12 V DC 100 MS/s
Uses one GEN DAQ slot, holds up to six 5B modules. 5B modules, I/O connectors and
cabling not included. An acquisition card is required for actual recording.
The 5B Series signal conditioning modules provide a low cost method of connecting analog
signals with data acquisition systems. They are designed to convert thermocouples, RTD's,
strain gages, frequencies, potentiometers, slide wires and other signals into standardized,
isolated analog outputs.
Resolution (2)
Memory
16 bit 128 MB
16 bit 128 MB
16 bit 256 MB
16 bit 512 MB
16 bit 512 MB
16 bit 128 MB
16 bit 512 MB
16 bit 128 MB
16 bit 512 MB
16 bit 200 MB
16 bit 200 MB
16/24 bit 1800 MB
16/24 bit 1800 MB
15 bit 128 MB
14 bit 1800 MB
-- 1800 MB
(4)
-- 1800 MB
(4)
16/18 bit 200 MB
16/18 bit 1800 MB
1 bit 512 MB
1 bit 512 MB
Resolution Isolation
14 bit User application defined
15 bit User application defined
14 bit 1800 V RMS
15 bit 1800 V RMS
14 bit User application defined
GEN5i
Channels (3)
Event, T/C
8 0, 0
8 0, 0
8 0, 0
8 0, 0
8 0, 0
4 0, 0
4 0, 0
4 0, 0
4 0, 0
16 16, 0
32 16, 0
16 16, 2
32 16, 2
4 0, 0
4 0, 0
0, 0
(4)
4
0, 0
(4)
4
6 16, 2
6 16, 2
64 0, 0
8 & 32 0, 0
325