HBM Genesis GEN5i User Manual page 478

Triggering
Component
Channel trigger
Pre- and post-trigger length
Trigger rate
Trigger total
Resolution
Hysteresis
Cross channel triggering
Real-time Analysis
Component
©
StatStream
Acquisition Modes
Component
Sweeps
Continuous
Dual
Slow fast sweep
Storage Modes
Component
Recorder
Scope
Transient
Ordering Information
Model
Uni 200kS, 128M Uni 200kS, 128M
Uni 1MS, 512M
478
Unit Description
Fully independent, per channel
Up to 400 triggers per second, zero re-arm time
Total number of triggers per recording
For each level
Defines the trigger insensitivity
Analog triggers of all channels
Qualifiers of all channels
Description
Each channel includes real-time extraction of Max, Min, Mean, Peak-to- Peak, and RMS values
Description
Triggered acquisition to RAM without sample rate limitations; for single or repetitive transients or
intermittent phenomena.
Direct storage to PC or mainframe hard disc without file size limitations; triggered or un-triggered; for long
duration recorder type applications with up to 1 MS/s rate per channel; (maximum aggregate rate pending
from mainframe configuration and PC).
Combination of Sweeps and Continuous; recorder type streaming to hard disc with simultaneously
triggered sweeps in RAM.
A triggered acquisition in RAM which includes an acquisition phase with a higher sample rate, located at
a point of interest.
Description
Spooled directly to hard-disk of control PC; unlimited file size or duration
Store in transient memory
Store in transient memory, single or A-B-A time base
Unit Description
4 Channel, 200 kS/s Universal Card, 128 MB
RAM (16 MS/ch)
4 Channel, 1 MS/s Universal Card, 512 MB RAM
(64 MS/ch) isolated
GEN5i
Value
1
0 to full memory
1 per 2.5 ms
10,000
16 bit (0.0015 %)
0.1 to 100 % of Full Scale
Logical OR
Logical AND
Order number
1-GN440-2
1-GN441-2
I2679-4.0 en