Handle; Turning Handle - HBM Genesis GEN5i User Manual

I2679-4.0 en
7.5

Handle

The handle is used to carry the GEN5i system. Only carry the instrument when
the handle is in the mid-position.
Figure 7.12: GEN5i with handle in the mid-position
The handle can be turned to the top- or bottom side. When the handle is turned
to the bottom side it can be used to slightly lift the instrument front so the display
angle is towards the user. The angle between display and vertical is about +4°.
When a bigger lift angle is necessary use the GEN5i front feet (+12°).
7.5.1

Turning handle

To turn handle, act as GEN5i stand:
1 Put instrument on flat surface.
2 Push-in both sides of the handle turning point.
GEN5i
95