Table of Contents
Advertisement
200
IM1 - Interface/Controller Module 1 Options
11.6
Your GEN series data acquisition system can be equipped with a variety of
options. Most options are factory-installed, i.e. you must choose an option at
the time of ordering or return the instrument to a qualified service point for the
upgrade.
The IM1 Interface/Controller modules of the GEN series mainframe have one
expansion slot that can be used for one of the following options:
Option (for IM1)
SCSI interface (1-G004-2)
External SCSI drive (1-G005-2)
Rack mount SCSI drive (1-G006-2)
Fiber optic Ethernet (1-G050-2)
IRIG (1-G001-2)
IRIG/GPS (1-G002-2)
(1) Replacement option of standard communication slot - does not use
expansion slot.
(2) The fiber optic Ethernet and SCSI option cannot be combined.
(3) Needs SCSI Interface option.
(4) Factory installed option only.
Option - Fiber optic Ethernet Interface
11.6.1
The GEN series Optical 1 Gbit Ethernet interface is 'factory-installed-only' and
replaces the standard single-channel copper wire Ethernet interface of a GEN
Series interface/controller module.
Figure 11.47: Fiber Optic Ethernet Board
(2)
(3)
(3)
(1)(2)
GEN5i
Uses expansion slot
(4)
Yes
No
No
(4)
No
(4)
Yes
(4)
Yes
I2679-4.0 en
Advertisement
Table of Contents
Troubleshooting
