Table of Contents
Advertisement
A.10
B2889-5.0 en (GEN series GN814)
Capabilities Overview
Model
Maximum sample rate per channel
Memory per card
Analog channels
ADC resolution
Digital event/Timer/Counter support
Isolation
Input type
(1)
An unbalanced differential input can be used to do isolated single ended and differential measurements.
GEN series GN814 Block diagram
Note
The listed specifications are valid for cards that are calibrated, and used in the same mainframe and slots
as they were at the time of calibration. When the card is removed from its original location and placed in
another slot and/or mainframe the following specifications are invalidated due to thermal differences within
the configurations: Offset error, Gain error and MSE. Typically the resulting specification will be double.
458
GN814
200 kS/s
128 MB
8
16 bit
no
yes; channel to channel and channel to chassis
Analog isolated single ended, unbalanced differential
Figure A.84: Block diagram GEN series GN814
GEN5i
(1)
I2679-4.0 en
Advertisement
Table of Contents
Troubleshooting
