Example Of A Master/Slave Configuration - HBM Genesis GEN5i User Manual

I2679-4.0 en
11.7.4

Example of a Master/Slave configuration

The following diagram shows an example of a Master/Slave configuration with
a master driving four slave mainframes.
Figure 11.66: Example of a Master/Slave configuration with four slave
mainframes
A Master mainframe
B Slave mainframes
C Fiber optic cable
1 Connect the Master/Slave card connector labelled M/S, OUT 1 of the
master mainframe to the top connector labelled M/S IN of the Master/Slave
card of the first slave mainframe.
2 Connect the Master/Slave card connector labelled M, OUT 2 of the master
mainframe to the top connector labelled M/S IN of the Master/Slave card
of the second slave mainframe.
GEN5i
227