HBM Genesis GEN5i User Manual page 84

84
D Audio connectors The onboard motherboard audio circuit implements
7.1+2 Channel High Definition Audio with UAA (Universal Audio Architec-
ture). The GEN5i unit is shipped with an internal speaker (mono) only.
Through the Microsoft Windows 7 operating system audio settings can be
changed for 2, 4, 6 or 8 channel configuration. The audio connectors are
color coded and depending on the number of audio channels selected, the
connector configuration is as in table 4-1.
Table 7.1: Audio connector configuration
Audio con- 2-channel
nector
Light Blue Line in
Lime Front speaker
out
Pink Mic in
Gray
Black
Yellow Orange
E Ethernet connector The motherboard supports two Ethernet channels.
One of these channels is dedicated used by the GEN5i measurement sec-
tion, not available to the user. The other channel 10/100/1000 Mb is free
for the user to connect the system to a network.
In order to achieve the specified performance of the Ethernet port, Cate-
gory 5 twisted pair cables must be used with 10/100 MB and Category 5e,
6 or 6e with 1 Gb LAN networks.
F Serial Port connector One RS232 serial port (Com1) is available on the
motherboard. It is a DB9M connector, any DB9F connector is compatible.
4-channel
Line in
Front speaker
out
Mic in
- -
-
Rear speaker
out
- -
GEN5i
6-channel 8-channel
Line in Line in
Front speaker Front speaker
out out
Mic in Mic in
-
Side speaker
out
Rear speaker Rear speaker
out out
Center/ Sub- Center/ Sub-
woofer woofer
I2679-4.0 en