HBM Genesis GEN5i User Manual page 450

Channel to Channel Phase Match
Using different filter selections (Wideband/Bessel IIR/FIR/etc.) or different filter bandwidths will lead to phase mismatches between channels.
Wideband
GN813 Channels within mainframe
Bessel IIR (Fc @ -3 dB), 100 kHz Filter frequency
GN813 Channels within mainframe
FIR (Fc@ -0.1dB) and FIR (Fc @ -3 dB), 250 kHz Filter frequency
GN813 Channels within mainframe
GN813 Channels across mainframes
On-board Memory
Per card
Organization
Memory diagnostics
Storage sample size
Digital Events/Timer/Counter
Digital event inputs
Digital event outputs
Timer/Counter
450
100 kHz Sine
Channels on card 0.7 deg (0.02 µs)
0.7 deg (0.02 µs)
Channels on card 0.7 deg (0.02 µs)
0.7 deg (0.02 µs)
Channels on card 0.7 deg (0.02 µs)
0.7 deg (0.02 µs)
Defined by synchronization method used (None, IRIG, GPS, Master/Slave)
512 MB (256 MS)
Automatic distribution amongst enabled channels
Automatic memory test when system is powered and not recording
16 bits, 2 bytes/sample
Not supported
Not supported
Not supported
GEN5i
I2679-4.0 en