Table of Contents
Advertisement
11 Interface/Controller Module
144
11.1
Introduction
The Interface/Controller Module runs a high-end CPU with an embedded real-
time operating system. It can store data to local (RAM) memory, optional extras
are available for storage and communication.
Each complete mainframe houses an Interface/Controller Module which
enables data input and output so that the mainframes can be connected
together in a Network.
Starting January 2012 an upgraded Interface/Controller Module (IM2) is
shipped as standard with all mainframes, thus there will be two different
Interface Modules in use and documented:
Interface/Controller Module 1 (IM1)
l
Interface/Controller Module 2 (IM2)
l
Figure 11.1: Interface modules (IM1-left) (IM2-right)
If you are not sure which Interface/Controller Module you have in your
mainframe please contact your local sales representative or send an email to
info@hbm.com. In both cases please provide us with the serial number of your
mainframe. You will find this number at the label on the rear side of the
mainframe.
GEN5i
I2679-4.0 en
Advertisement
Table of Contents
Troubleshooting
