Optical Network (Sfp) - Trouble Shooting - HBM Genesis GEN5i User Manual

194

Optical Network (SFP) - Trouble shooting

11.5.5
If no connection is present on the fiber optic channel, first check the following:
1
That the cable type matches the SFP module type (single-mode or
multi-mode).
For this you will need to check with the cable manufacturer specifications
and the wavelength print on the label of the SFP module to compare
(1310 nm is single
2 Check that the cable wavelength and SFP module wavelength are the
same.
For this you will need to check with the cable manufacturer specifications
and check the print on the label of the SFP module to compare.
3 Check that the communication speed at either end of the fiber optic
connection is the same.
4 Inspect cable and connectors for any possible faults and breaks that could
impede communication.
- mode, 850 nm is multi - mode).
GEN5i
I2679-4.0 en