Removing Protective Cover On Gen2I And Gen5I - HBM Genesis GEN5i User Manual

I2679-4.0 en
11.5.6

Removing protective cover on GEN2i and GEN5i

Within the standard pack contents of this option are two protective covers for
use with the GEN2i and the GEN5i. These covers are replacements for the
older covers that are installed on the GEN2i and GEN5i. If using a GEN2i or
GEN5i you can follow this replacement procedure.
Removing SFP protective cover on a GEN2i
1 To use the SFP option on a GEN2i with IM2 you need to remove the
protective cover first.
Note Requires screw driver Torx T10.
Figure 11.42: (GEN2i SFP cover - standard)
2 When removed replace with the new cap to keep the socket protected.
Figure 11.43: (GEN2i SFP cover - new)
GEN5i
195