Im1 - Communication And Control - Standard Ethernet Interface; Im1 - I/O Connectors - HBM Genesis GEN5i User Manual

178
The CPU Reset Switch can be used to reset the controller/interface in the rare
event of a system malfunction. To reset the unit carefully press the recessed
switch with a small screwdriver or equivalent.
The IM1 has a unique Communication section with 1 Standard Ethernet
Interface and 4 activity LED's. The 4 I/O connectors are very similar to the IM2
connectors however the reset switch on the IM1 is between the first and second
I/O connector on this module. The first connector on this module is labeled the
TB-A IN.
The IM1 is built from three main sections; the I/O Connectors, the
Communication section and the Expansion slot.

IM1 - Communication and Control - Standard Ethernet Interface

11.4.1
The GEN5iuses standard TCP/IP protocol over Ethernet to communicate with
your PC. The System Interface/Controller Module provides access to the
Ethernet network.
The module is equipped with an interface with 100/1000 Base-T Gigabit
support. You must connect to the RJ-45 connector.
For full details on how to connect the GEN series with a PC see "PC
connections" on page 83.
LED's are used to indicate activity as well as connection.

IM1 - I/O connectors

11.4.2
A
External Time base In (TB-A IN)
GEN5i
I2679-4.0 en