12.11.2 Gn4070 Binary Marker Hv Card - HBM Genesis GEN5i User Manual

I2679-4.0 en

12.11.2 GN4070 Binary marker HV card

The binary marker HV input board
allows you to acquire 32 digital event
signals (markers) as well as 8 digital
event signals that are optically
isolated. Although general purpose,
this board is specifically suited for
the medium/high voltage market. A
fiber optic isolated output is provided
to present an REC-signal that can be
used to drive an external instrument.
The fiber optic inputs and the fiber-
optic REC output allow for a tight
integration with the BE3200 high-
definition test sequencer.
In addition 9 binary input channels
can be assigned under software
control to provide 3 channels of
counter/timer functionality.
The counter/timer functionality
includes:
64-bit general purpose up/down
l
counter
Frequency/RPM counter
l
Quadrature/position
l
measurements
The counter/timer functionality uses up to 3 event bits per channel. These event
bits also keep their original functionality. You can, for example, use a
quadrature encoder and at the same time look at the quadrature signals
separately.
For more information about the Binary Marker HV input card, please refer to
"B3246-1.0 en (GEN series GN4070)" on page 492.
GEN5i
297