Command Set Of The Hbm Interpreter; Important Agreements - HBM DMP41 Interface Description

Digital precision measuring device

Hide thumbs Also See for DMP41:

Table of Contents

Command set of the HBM interpreter

DMP41

5.1

These agreements and general information will facilitate your work with the

HBM Interpreter commands.

Notation

S All commands can be input using lower or capital case letters.

Command shortform

S The command shortform consists of 3 characters and, depending on the

command, a list of parameters separated from each other by commas.

E.g.CHS 3(x)

Space

S Prefixed and suffixed empty spaces (blanks) are ignored for parameters.

Command types: - Setting commands - Query commands

S The setting and query commands act on all selected (active) channels

(see CHS command).

S Query commands - these are used to read out information - are marked

by an added question mark (?).E.g. IDN?

Responses

S The device responses shown in the examples are displayed in italics.

The responses are only displayed for one channel.

Character strings

S Character strings must be enclosed in quotes when input. Quotes are

also used during output.

E.g.UCC"TEST"(x)

Command end

For input commands:

A03474_04_E00_00 HBM: public

Command set of the HBM interpreter

Important agreements

Table of Contents