HBM Genesis GEN5i User Manual page 519

I2679-4.0 en
These probes can only be used in front of isolated unbalanced amplifiers.
So these probes overcome the problems of "standard" passive probes and offer
increased input ranges AND high accuracy.
Table C.5: High accuracy voltage probes for isolated amplifiers overview table
(Part 1)
Part number
(1)
1-G041-2
Must use suitable rack 1-
G019-2
(1)
1-G042-2
Must use suitable rack 1-
G020-2
(1) Suitable instruments and input amplifiers:
GEN DAQ Basic XT cards GN813 & GN814
Note These probes can only be used in the suitable probe racks, which itself must
be mounted in a 19" rack or in a similar protective housing. Each probe rack
holds up to 16 probes.
Table C.6: High accuracy voltage probes for isolated amplifiers overview table
(Part 2)
Part number
(1)
1-G041-2
Must use suitable
rack 1-G019-2
(1)
1-G042-2
Must use suitable
rack 1-G020-2
(1) Suitable instruments and input amplifiers:
GEN DAQ Basic XT cards GN813 & GN814
Note These probes can only be used in the suitable probe racks, which itself must
be mounted in a 19" rack or in a similar protective housing. Each probe rack
holds up to 16 probes.
Divider factor
x10
x1
AC coupled
Accuracy Cable length
0.2 %, 1.2 m
0.1 % typical
0.2 %, 1.2 m
0.1 % typical
GEN5i
Maximum input voltage
1 kV
100 V AC
CMV: 1 kV DC
Bandwidth
250 kHz
250 kHz
519