HBM Genesis GEN5i User Manual page 169

I2679-4.0 en
2 Setup in Perception:
Start Perception and navigate to the Settings menu and select External
Storage Setup.
Please make sure you have read section Explaining the External Storage
Setup Dialog (see Figure 11.20) before executing this procedure.
The External Storage Setup dialog:
The information in this dialog must match the information defined in the
configuration of the connected NAS. Refer to appendix "Setting up the
iSCSI with Synology
®
using Synology .
Figure 11.20: External Storage Setup dialog (Setup an iSCSI NAS
connected to a corporate network – basic setup)
A GEN Data acquisition system
B iSCSI Host
C iSCSI Target
GEN Data acquisition system - Network
3
interface:
®
NAS" on page 574 when necessary for an example
GEN5i
(See Figure 11.20 - A)
169