Starting up
Important information before measurement
46
5.3
Important information before measurement
If you are using several DMP41s, they must be synchronized before
measurement (even cables lying next to one another could otherwise cause
measurement errors). We recommend synchronizing the DMP41s when:
S the transducer cables of several DMP41s run side by side,
S the measuring points are unshielded and are close together.
If synchronizing several DMP41s, use a standard networking cable
(synchronization cable 1-KAB287-3) for connecting the SYNC sockets on
the back of the DMP41 (
on Page 39).
A03470_07_E00_00 HBM: public
è
also see Chapter 4.5 "Synchronization", starting
DMP41