HBM Genesis GEN5i User Manual page 230

230
To disable the Master/Slave operation and set the mainframe to Stand-alone
mode:
1
Select the mainframe that you want to use as a Stand-alone.
2
Double-click on the Master/Slave mode cell to open it for modification.
3
In the drop-down list that comes up, select Stand-alone.
The Master/Slave operating mode of the mainframe has been set.
If you have set the mainframe to Master mode, the letter "M" appears in the
GEN series front panel.
Figure 11.68: Mainframe in Master mode
GEN5i
I2679-4.0 en