HBM Genesis GEN5i User Manual page 471

Harmonized standards for CE compliance, according to the following directives
Low voltage directive (LVD): 2006/95/EC
Electromagnetic compatibility directive (EMC): 2004/108/EC
EN 61000-4-6 Immunity to conducted disturbances, induced by radio-frequency fields
0.15 to 80 MHz, 1000 Hz AM; 10 V RMS @ mains, 3 V RMS @ channel, both using clamp: performance criteria A
Voltage dips, short interruptions and voltage variations immunity tests
EN 61000-4-11
Dips: performance criteria A; Interruptions: performance criteria C
Ordering Information
Article
Basic200k ISO XT
(1) All GEN series systems are intended for exclusive professional and industrial use.
Accessories, to be ordered separately
Article
(1)
1kV DC Probe
(1)
1kV AC Probe
DC Probe Rack
AC Probe Rack
(1) Not recommended for new purchases. Use 1-GN610-2 or 1-GN611-2 instead.
I2679-4.0 en
(1)
Probe Rack with 16 probes
Description
8 Channel, 16 bits, 200 kS/s, ± 2 V to ± 100 V input
range, 128 MB RAM (8 MS/channel), isolated,
unbalanced differential, with single isolated BNC for
each channel
Description
1 : 10 Voltage divider; DC coupled, ± 1 kV input; for
isolated Basic1M XT ISO Card with extended input
range only; requires DC probe rack to be mounted;
1.25 m (49 inch) cable
1 : 1 AC coupler probe. AC coupled, ± 100 V AC
measurement. Input allows up to ± 1 kV DC with a
± 100 V AC modulated signal. DC part of input signal
suppressed on the output. For use with Basic1M XT ISO
or Basic200k XT ISO only.
19 inch rack for 1 kV DC probes; 1 U height,
holds a maximum of 16 DC probes
19 inch rack for 1 kV AC probes; 1 U height,
holds a maximum of 16 AC probes
GEN5i
Order No.
1-GN814-2
Order No.
1-G041-2
1-G042-2
1-G019-2
1-G020-2
471