HBM Genesis GEN5i User Manual page 101

I2679-4.0 en
Figure 8.1: Front panel control
A Power standby
B Start
C Stop
D Single Shot
E Pause
F Trigger
A Power standby
B Start The Start command starts acquisition of data.
C Stop To stop or abort an acquisition press this button. The active data
storage will be finished. When in a sweep acquisition mode, a stop com-
mand while acquiring post-trigger data will be processed at the end of the
sweep; this means that the sweep will be processed as specified. During
this time the stop indication in the software will be active. If you want to
abort the sweep you must press the Stop button a second time. The current
sweep will be aborted immediately.
D S/Shot Starting Perception V6.30 the function of this button has been
changed. It is now identical to the Start button. Future GEN Series systems
will no longer have this button.
GEN5i
101