GEN5i
Note
One way to overcome exceeding the maximum external sample rate of the
board of choice might be to use the "External Clock Divider". The maximum
external clock rate of the GEN DAQ mainframe is 2 MS/s. Using an "External
Clock Divider" of 4 would allows the 1 MS/s card to run an external clock rate
of 2 MS/s. It does not increase the measurement resolution, but it does allow
a measurement at higher external clock rates.
G.1.4
Perception Display settings explained
The Perception displays are capable of handling external time base recordings
in different ways. The setup is controlled using the display's X-Annotation
Scaling settings.
These settings can be found by using a right mouse click in the display of choice
and selecting "Display Setup" at the bottom of the menu.
Figure G.4: Perception - Display setup
556
I2679-4.0 en