Table of Contents
Advertisement
A.4
B3618-3.0 en (GEN series GN610)
Capabilities Overview
Model
Maximum sample rate per channel
Memory per card
Analog channels
Sample resolution
Digital Event/Timer/Counter support
Isolation
Input type
Real time calculations
(1)
No probes supported
GEN series GN610 Block diagram
Note
The listed specifications are valid for cards that are calibrated, and used in the same mainframe and slots
as they were at the time of calibration. When the card is removed from its original location and placed in
another slot and/or mainframe the following specifications are invalidated due to thermal differences within
the configurations: Offset error, Gain error and MSE. Typically the resulting specification will be double.
356
GN610
2 MS/s
2 GB
6
16/18 bit
Yes
Yes; channel to channel and channel to chassis
Analog isolated balanced differential
Yes; Automatic zero crossing detection with calculations of Cycle and Cycle Frequency,
RMS, Mean, Minimum, Maximum, Peak to Peak, Area and Energy.
All calculations can be used to trigger the recording.
Figure A.20: Block Diagram GEN series GN610
(1)
GEN5i
I2679-4.0 en
Advertisement
Table of Contents
Troubleshooting
