HBM Genesis GEN5i User Manual page 368

Digital Event/Timer/Counter
Uni- and bi-directional frequency/RPM measurement
Maximum input frequency
Gate measuring time
External start
External stop
(1) Only if supported by mainframe
368
(1)
Inputs 2 pins; signal, direction
5 MHz
Accuracy 0.1 %
0.5 µs to 50 s; user selectable to control update rate independent of sample rate
Direction input
Only used when in bi-directional frequency/RPM mode
Low: Positive frequency/RPM, e.g. left rotations
High: Negative frequency/RPM, e.g. right rotations
User selectable Rising/Falling edge signal will start a new recording
User selectable Rising/Falling edge signal will stop the recording
GEN5i
I2679-4.0 en