Table of Contents
Advertisement
I2679-4.0 en
12.5
Basic Extended Isolated amplifier card
12.5.1
GN813 Basic XT ISO 1 MS/s input card
8 analog channels
l
Unbalanced differential inputs
l
± 2 V to ± 100 V input range
l
250 V DC channel to channel
l
Isolation
User selectable digital Bessel
l
and FIR filters
1 MS/s sample rate
l
16 bit resolution
l
512 MB memory
l
Single isolated BNC for each
l
channel
The GEN DAQ Basic XT ISO
1 MS/s input card is a general
purpose signal conditioner for use
with voltage inputs, externally
conditioned signals or isolated
probes and current clamps.
The basic signal conditioner
provides eight channels of isolated
single ended voltage inputs from
± 2 V to ± 100 V full scale with full
offset and auto-zero capability.
Every channel is equipped with an
independent full range input
amplifier, 7-pole Bessel and
Butterworth anti-alias filter, 16-bit
Analog-to-Digital converter
operating at 1 MS/s and several
selections of digital filtering.
The on-board transient memory size
is 256 Mega-Samples (512 Mega-Bytes). The memory is shared by enabled
channels.
Each channel also features two set-points for trigger or alarm purposes.
Extensive acquisition and trigger modes allow many different ways to capture
valuable data even at the highest sample rates. All channels are synchronously
sampled at full speed without multiplexing and almost immeasurable crosstalk.
The model uses standard isolated BNC connectors, whose shells are
connected to isolated ground. The inputs are 1 MΩ impedance and are
compatible with isolated probes and current clamps.
GEN5i
261
Advertisement
Table of Contents
Troubleshooting
