11.3.13 Setup An Iscsi Nas Connected To A Corporate Network - Basic Setup - HBM Genesis GEN5i User Manual

I2679-4.0 en
Password:
l
Enter the details used during the setup procedure of the CHAP
authentication on the NAS. If none were chosen, leave these field
blank.
Click Apply when done to set the new settings and then click Close.
The NAS should now be available in the setup of your GEN series mainframe.
Figure 11.18: Storage location with options
11.3.13 Setup an iSCSI NAS connected to a corporate network – basic setup
This is a setup of a GEN DAQ system with the NAS connected through an
Ethernet switch on a company network.
The NAS location is not restricted and allows freedom of placement of each
component in the system. This setup enables network access to configure the
NAS or GEN DAQ and to read the data on the iSCSI storage device via the
GEN DAQ system.
Note Data on the iSCSI storage device is only readable on PC when using a
GENDAQ system to do so.
GEN5i
167