HBM Genesis GEN5i User Manual page 354

Analog to Digital Conversion
Component
Model
Sample rate
Sampling
ADC resolution
Enhanced resolution for
sample rates ≤ 10 MS/s
Bessel filter specifics
Analog anti-aliasing
Bessel or IIR specifics
Digital
On-board Memory
Component
Model
Per card
Per channel
(with all 4 channels used)
Triggering
Component
Channel trigger
Pre- and post-trigger length
Trigger rate
Trigger total
Resolution
Hysteresis
Cross channel triggering
Analog trigger modes
Basic
Dual Level
Analog qualifier modes
Basic
Dual (level)
354
Fast Differential Digitizers 25 MS/s
25 MS/s
Single ADC per channel, synchronous between all channels
15-bit (0.003 %)
Fast Differential Digitizers 25 MS/s
25 MS/s
16 MS (64 MS)
Unit Description
Fully independent, per channel
Up to 400 triggers per second, zero re-arm time
Total number of triggers per recording
For each level
Defines the trigger insensitivity
Analog triggers of all channels
Qualifiers of all channels
Single level
Two individual levels, OR-ed
Arm the acquisition with a single level
Arm the acquisition with two individual levels, OR-ed
Value
16-bit
6th order Bessel lowpass, 10 MHz @ -3dB
6th order Bessel (IIR) lowpass, in 12 steps
5 MHz to 50 kHz
Value
Fast Differential Digitizers 100 MS/s
100 MS/s
14-bit (0.006 %)
Fast Differential Digitizers 100 MS/s
100 MS/s
100 MS (400 MS)
Value
1
0 to full memory
1 per 2.5 ms
10,000
16 bit (0.0015 %)
0.1 to 100 % of Full Scale
Logical OR
Logical AND
Positive or negative crossing
One positive and one negative
crossing
Positive or negative crossing
One positive and one negative
crossing
GEN5i
I2679-4.0 en