Fuse Requirements And Protection - HBM Genesis GEN5i User Manual

GEN5i
5.3

Fuse requirements and protection

The GEN5i AC supply has no replaceable fuses installed. The power supply
uses a build in resettable power shut down protection.
WARNING
Any interruption of the protective conductor inside or outside the
apparatus is likely to make the apparatus dangerous. Intentional
interruption is prohibited.
When the apparatus is connected to its supply, terminals may be live, and
the opening of covers for removal of parts is likely to expose live parts.
Whenever it is likely that the protection has been impaired, the apparatus shall
be made inoperative and be secured against any unintended operation.
The protection is likely to be impaired if, for example, the apparatus shows
visible damage or has been subjected to severe transport stresses.
It is the responsibility of the user to ensure the safety of any accessories, such
as probes, used with the equipment.
WARNING
ELECTRICAL SHOCK HAZARD! Do not remove covers. Refer servicing to
qualified individuals.
Proper use of this device depends on careful reading of all instructions and
labels.
If the instrument is used in a manner not specified by HBM, the protection
provided by the instrument can be impaired.
58 I2679-4.0 en