HBM Genesis GEN5i User Manual page 580

580
9 The following iSCSI Creation Wizard dialog will appear:
Figure J.7: Create a new iSCSI target dialog
A Name
B IQN number
C Enable CHAP
D CHAP Name:
E CHAP Password:
F CHAP Confirm Password:
G Enable Mutual CHAP
Figure J.7 dialog asks for your IQN (B) number and a Target Name (A).
CHAP (C) password protection can also be setup, this is the same
password that will be used in the Perception setup dialog; External
Storage Setup > iSCSI Logon: User name and Password.
If you need to check the user name of an existing iSCSI Target click the
correct target in the iSCSI Target tab (see Figure J.6 (B)) and then click
Edit.
A Name: Enter a name for target mapping.
Recommended Format: iqn.yyyy-mm.domain:device.ID
GEN5i
I2679-4.0 en