Gn814 Basic Xt Iso 200K Input Card - HBM Genesis GEN5i User Manual

I2679-4.0 en
12.5.2

GN814 Basic XT ISO 200K input card

8 analog channels
l
Unbalanced differential inputs
l
± 2 V to ± 100 V input range
l
250 V DC Isolation
l
User selectable digital Bessel
l
and FIR filters
200 kS/s sample rate
l
16 bit resolution
l
128 MB memory
l
Single isolated BNC for each
l
channel
The GEN DAQ Basic XT ISO
200 kS/s input card is a general
purpose signal conditioner for use
with voltage inputs, externally
conditioned signals or isolated
probes and current clamps.
The basic signal conditioner
provides eight channels of isolated
single ended voltage inputs from
± 2 V to ± 100 V full scale with full
offset and auto-zero capability.
Every channel is equipped with an
independent full range input
amplifier, 7-pole Bessel and
Butterworth anti-alias filter, 16-bit
Analog-to-Digital converter and
several selections of digital filtering.
The on-board transient memory size
is 64 Mega-Samples (128 Mega-
Bytes). The memory is shared
among enabled channels.
Each channel also features two set-points for trigger or alarm purposes.
Extensive acquisition and trigger modes allow many different ways to capture
valuable data even at the highest sample rates. All channels are synchronously
sampled at full speed without multiplexing and almost immeasurable crosstalk.
The model uses standard isolated BNC connectors, whose shells are
connected to isolated ground. The inputs are 1 MΩ impedance and are
compatible with isolated probes and current clamps.
For more information about the GN814 Basic XT ISO 200K input card, please
refer to "B2889-5.0 en (GEN series GN814)" on page 458.
GEN5i
263