HBM Genesis GEN5i User Manual page 109

I2679-4.0 en
● The network is listed To connect to a network that is listed in the
Connect to a network dialog box, double-click the network name or
click the network name and then click Connect. If the connection
attempt is not successful, use Windows Network Diagnostics to
diagnose the problem and suggest a solution.
● The network is not listed If the wireless network you want to connect
to is not listed, click Set up a connection or network. Windows 7 will
display the Choose a connection option page where you typically
should select the Manually connect to a wireless network option. At
this point you will need to have a sufficient knowledge of your network
settings. If not, please contact your IT department or a network
knowledgeable person to assist you.
To disconnect from your local wireless network:
By default Windows 7 connects automatically to a wireless network at start-up
once you have selected it.
To prevent this you have two options:
● Remove the network connection
● Make the network connection a manual procedure (recommended
when you don't want automatic connection)
For both options:
1 Click Start, click Control Panel, click Network and Internet, and click
Network and Sharing Center and select the task Manage Wireless
Networks.
2
To change a setting right-click on the network's icon. On the context menu
that comes up:
● Select Remove Network to remove the network connection, or
● Select Properties. In the properties dialog that comes up make sure
that Connect automatically when this network is in range is
cleared.
When you have selected manual connection, you can still connect to the
network if you want to, but you'll need to do so manually. To do so right-click
the Windows 7's networking icon in the task bar and select Connect to a
Network.
GEN5i
109