HBM Genesis GEN5i User Manual page 323

Master/Slave Card (option, to be ordered separately)
Maximum number of mainframes
LED signaling
Connection topology
Cable type
Maximum cable length
Cable length delay compensation
Time required to full synchronization after Master/Slave signal detected
Recording or pause active
User notifications while recording
Basic Synchronization
Synchronized time base
Channel trigger exchange
Mainframe to mainframe phase shift
(1)
Extended Synchronization
Synchronous recording actions
Synchronous manual trigger
(1) Extended Synchronization only supported by GEN2i Master/Slave Synchronization connector.
GEN5i Shipping Case (option, to be ordered separately)
Dimensions
Weight Empty Case
GEN5i Storage Area
GEN5i Accessories Area
Reliable Case Transport
Case Extras
Shock and Vibration
Drop Test
I2679-4.0 en
9; one Master controlling up to eight Slaves
Optical link synchronized, not connected, function disabled
Star connection; each Slave directly connected to Master by individual cables
850 nm Multi Mode (50/125 μm) optical cable (single 3 m (10 ft) cable included)
500 m (1640 ft)
Automatic delay compensation supported
No recording active 1 to 5 minutes
1 to 5 minutes plus 25 s per ms recording time deviation from Master time
Time marks on Master/Slave signal lost/restored and Master/Slave time synchronized
First sample Synchronizes the first sample in the recording for each mainframe
Prevents frequency drift of the sample rates within each mainframe
Synchronously exchanges every channel trigger connected to the Master/Slave trigger bus
to/from each connected mainframe
± 100 ns
Not supported by Master/Slave card
Not supported by Master/Slave card
Figure A.3: Hardcover reusable shipment case with wheels and transport handle
575 mm (22.63") x 444 mm (17.50") x 670 mm (26.37") (H x W x D)
20.3 kg (44.75 lbs)
Special area for GEN5i, slides in from the top for easy storage and removal from the
shipment case. Protects the GEN5i TFT for impact during drop, shock and vibrations
Separate area for GEN5i keyboard, mouse, power cable and some cables
Wheels and extendable handle constructed for stable transportation with low gravitation
point to avoid tumbling of case in any direction during roll transport
Two lift handles and locks on side of the case for easy transport
Tested with GEN5i inside case according to ASTM D4728 E
Tested with GEN5i inside case according to ASTM D4169-04 Level I
GEN5i
323