HBM Genesis GEN5i User Manual page 392

Alarm Output
Selection per Card
Alarm modes
Alarm levels
Alarm output
Alarm output delay
Real-Time Analysis
®
StatStream
®
StatStream
Patent Number : 7,868,886
Real-Time Calculations (Perception V6.40 and higher)
392
User selectable On/Off
Basic or Dual
Basic Above or below level check
Dual (level) Outside or within bounds check
Levels Maximum 2 level detectors
Resolution 16 bit (0.0015 %); for each level
Active during valid alarm condition, output supported through mainframe
515 µs ± 1 µs + maximum 1 sample period using decimal time base
503 µs ± 1 µs + maximum 1 sample period using binary time base
Each channel includes real-time extraction of Maximum, Minimum, Mean, Peak to Peak,
Standard Deviation and RMS values
Supports the real-time Live scrolling and scoping waveform displays as well as the real-time
meters during recording
Supports the fast displaying and zooming within extremely large recordings
Supports the fast calculation of statistical channel information
Figure A.47: Real Time Calculations
GEN5i
I2679-4.0 en