102
E Pause
This button serves two purposes:
1
When no acquisition is active it will place the system in the pause or
stand-by mode. Although the system is digitizing, no data is stored in
memory or on disk. This is useful for monitoring purposes.
2
When a continuous or sweeped acquisition is active, it will place the
system in a hold mode: although the unit is digitizing, no data is stored
in memory or on disk. At this point when Start is selected, the current
recording continues; when Stop is selected, the recording is finished.
F
Trigger Press the Trigger button to send a 'manual' trigger command to
the system. Typically a trigger will end and acquisition.
USB Ports
Located on the bottom left are three front mounted USB 2.0 ports for easy
access, more USB ports can be found on the back of the instrument.
Figure 8.2: USB 2.0 ports (front mounted)
A
USB ports
B
Wireless adapter (Mounted hidden)
For information on the Wireless adapter please see "Wireless network" on
page 108.
GEN5i
I2679-4.0 en