HBM Genesis GEN5i User Manual page 284

284
4 Select between internal or external shunt usage: in the Internal shunt
column enable internal to use an internal shunt or clear the option to select
an external resistor. This selection operates switch S7 in Figure 12.9.
Depending on the selection:
When internal is chosen select the correct value in the Shunt value
l
column:
or type the value of the CAL resistor. This selection operates switch S8
in Figure 12.9 on page 266.
When external is chosen type the correct value of the external resistor
l
in the Shunt value column.
GEN5i
I2679-4.0 en