I 10 Gb Ethernet Windows Settings; Introduction - HBM Genesis GEN5i User Manual

I 10 GB Ethernet Windows settings

566
I.1

Introduction

To help achieve the highest possible speed rating for the 10 Gbit Ethernet card
the following settings can be made to the network adaptor in Windows
Windows 10G network adapter settings:
Interrupt moderation rate: high
l
Receive side scaling queues: 8
l
Receive buffers: 2048
l
Note The above Windows settings were tested and chosen using a specific setup of
equipment (including the Ethernet Server adaptor x520). These settings may
not be the optimal settings for your specific system.
1
Firstly, on the Windows
Centre.
Figure I.1: Windows
A Network icon
Right click the network icon in the Windows
Network and Sharing Centre.
Note: This dialog is also available by clicking Start (Windows orb) >
Control Panel > Network and Sharing Centre.
®
7 desktop navigate to the Network and Sharing
®
7 Network and Sharing Centre tooltip
GEN5i
®
®
system tray and click Open
I2679-4.0 en
7.