HBM Genesis GEN5i User Manual page 581

I2679-4.0 en
B IQN: Enter the actual iSCSI IQN name here.
Recommended Format: iqn.yyyy-mm.domain:device.ID
This IQN name is the same name used in Perception dialog External
storage setup: iSCSI Target - Target name (see Figure 11.6
"External Storage Setup dialog" on page 153 (C1) for an example).
C Enable CHAP If logon Password protection is needed select this check
box.
Note CHAP is used to authenticate iSCSI Initiators before using the iSCSI
Target.
D CHAP Name: Enter a name to be used on login to the iSCSI.
E CHAP Password: Enter a password; minimum 12 characters.
F
CHAP Confirm Password: Re-type the password.
G Enable Mutual CHAP will require both initiator and target to
authenticate each other before communicating.
When done click Next.
GEN5i
581