Connecting The Master/Slave Card - HBM Genesis GEN5i User Manual

226
11.7.3

Connecting the Master/Slave card

With the fiber optic cable, connect the Master/Slave card labelled M, OUT of
the master mainframe to the top connector labelled M/S IN of the Master/Slave
card of the slave mainframes.
Figure 11.65: Connecting the Master/Slave
A Master mainframe (M, OUT)
B Slave mainframe (M/S IN)
C Fiber optic cable
IMPORTANT
Connect the Fiber optic cable of the slave mainframes to the top
connector labelled M/S IN of its Master/Slave card.
With a Master/Slave card operating in slave mode only the top connector
labelled M/S IN is configured as a slave, all other connectors will not send
or receive signals.
GEN5i
I2679-4.0 en