Cylinder Pressure Analysis And Tdc Settings - HBM Genesis GEN5i User Manual

GEN5i
Special wishes can be adapted as cost option after consulting our CSI
programmer.
G.1.7

Cylinder Pressure Analysis and TDC settings

The Cylinder Pressure Analysis application is able to use all of the available
TDC settings. When properly used during the recording process, the defined
Offset, Analysis interval and Cycle size of the Cylinder pressure analysis CSI
will automatically process every new recording without user interaction.
Defining the Cycle Size, the Analysis Interval and analysis Offset relative to
the TDC signal is done using the configuration dialog of the Cylinder Pressure
Analysis application as shown in Figure G.7.
Figure G.7: Cylinder Pressure Analysis Configuration
I2679-4.0 en 559