Target Name (Iqn); What Is Chap - HBM Genesis GEN5i User Manual

I2679-4.0 en
Simplified, the NAS server looks like this:
Figure 11.7: NAS server - Overview
11.3.7

Target Name (IQN)

The target name is used in the selection process to identify the correct
iSCSI LUN setup inside your NAS server. The Target Name must match
the IQN Name setup in your NAS server software.
11.3.8

What is CHAP?

GEN DAQ systems support the iSCSI defined user logon protocol CHAP. This
allows to block your iSCSI storage device from unwanted access. Select Use
CHAP if CHAP password protection was selected during the setup of your NAS
server.
User Name:
l
The same name that was defined during the NAS setup process, for
reference see Figure J.1 "Synology Assistant" on page 574.
Note Make sure you have full read/write and modify access on your iSCSI storage
device
GEN5i
(See Figure 11.6 - C1)
(See Figure 11.6 - C2)
155