HBM Genesis GEN5i User Manual page 399

Shielded Cable 1-KAB290-xx (option, to be ordered separately)
This cable is specially designed to be used with the GN610 and GN611 boards
Cable setup
Wire thickness
Maximum wire resistance
Weight
Outside cable diameter
Minimum bend radius
Isolation
Capacitance
Temperature range
Non-operational (storage)
Available lengths
I2679-4.0 en
2 wires with shield and isolation
3 shrouded banana plugs on each side; Red, Black and Yellow
Figure A.48: Shielded cable setup
2 * 0.75 mm
0.250 Ω / m (0.0763 Ω / ft)
Approximately 143 g / m (1.54 ounce / ft)
Approximately 9 mm (0.354 inch)
10 times cable diameter
Resistance 20 MΩ / km
Voltage 600 V RMS CAT II; wire to wire; wire to shield; shield to outside
Wire to wire Approximately 110 pF / m (33.54 pF / ft)
Wire to shield Approximately 150 pF / m (45.73 pF / ft)
-15 °C (+5 °F) to +80 °C (+176 °F)
Operational
-40 °C (-40 °F) to +80 °C (+176 °F)
1.5 m (4.92 ft), 3.0 m (9.84 ft), 6.0 m (19.7 ft)
Figure A.49: Typical conducted immunity, tested using ± 10 V range
2
GEN5i
399