11.3.14 Setup An Iscsi Nas Connected To A Corporate Network - Advanced Setup - HBM Genesis GEN5i User Manual

GEN5i
11.3.14 Setup an iSCSI NAS connected to a corporate network – advanced setup
This setup of a GEN DAQ system with the NAS connected through an Ethernet
switch on a corporate network.
Compared to the example 3 ("Setup an iSCSI NAS connected without an
Ethernet switch" on page 163) this setup allows you to separate the network
data from the PC to your GEN DAQ system from the network data from the NAS
to you GEN DAQ system. This setup is recommended if you want to use high
streaming rates to the NAS system and using a lot of live displays to view the
data on the controlling PC.
The NAS location is not restricted and allows freedom of placement of each
component in the system. This setup enables network access to configure the
NAS and GEN DAQ and to read the data on the iSCSI storage device.
Figure 11.23: GEN DAQ with iSCSI NAS connected across an Ethernet switch
and connected to a corporate network (Advanced Setup)
172 I2679-4.0 en