Connections And Using The 10 Gbit Option - HBM Genesis GEN5i User Manual

I2679-4.0 en
Figure 11.32: 10 Gbit Ethernet card - with SFP+ module
Note
The maximum 10 Gbit throughput speed is per
therefore a shared specification for both interfaces combined. It is possible that
two interfaces can be used at the same time but only when one interface is used
for communication and the other is used for storage. Two interfaces cannot be
used at the same time for storage purposes nor can they be used at the same
time for communication purposes.

Connections and using the 10 Gbit Option

Note (1)
The 10 Gbit speed rating can be achieved with optimized settings using
compatible equipment and devices of similar speed ratings. Please see
appendix "Optimal Windows
page 566 for further details on the specific optimized settings.
- card. Throughput speed is
A 10Gbit LC Connection
Using the SFP+ Option
10Gbit LC optical connections
need an SFP+ module to enable
their use with LC connected
optical cable.
®
settings for 10 Gbit Ethernet Card" on
GEN5i
183