Option - Optical 1 Gbit Ethernet Interface - HBM Genesis GEN5i User Manual

I2679-4.0 en
For specifications and ordering information see "B3723-1.0 en (GEN series
GEN5i Portable Data Recorder)" on page 312.

Option - Optical 1 Gbit Ethernet interface

11.5.2
The Interface/Controller Module IM2 supports an optical 1 Gbit Ethernet
interface by means of a user installed SFP module. An SFP module is a small
form-factor pluggable transceiver that supports direct optical network
connections.
WARNING
Laser Safety
The system is classified as a Class 1 laser product. The SFP uses optical
light source for data and command communication. It does not emit
hazardous light but it is recommended to avoid direct exposure to the
beam.
This simple and powerful plug-in-and-use option enables the use of the Optical
Network connection on the IM2. There are 2 models available to choose from:
1 Gbit (850 nm) - Multi mode
l
1 Gbit (1310 nm) - Single mode
l
Figure 11.31: SFP Optical Network devices
A
SFP shown with dust-cap and removal bar
SFP label - 850 or 1310 nm
B
GEN5i
181