HBM Genesis GEN5i User Manual page 237

I2679-4.0 en
8 The synchronization status will first be Synchronizing for up to three
minutes before becoming Synchronized.
Figure 11.74: MASTER SLAVE Synchronizing
Figure 11.75: MASTER SLAVE Synchronized
9 In the Settings sheet, go to the Trigger group in the task pane and select
Channel.
10 In the Trigger mode column, set all triggers to Off.
Figure 11.76: Trigger mode list
11 Select the input with the connected TTL level, 1 Hertz signal on the master
mainframe and set the trigger of this channel to Basic.
12 In the Trigger group, select Recorder.
13 Double-click on the Master/Slave trigger cell to open it for modification.
GEN5i
237