HBM Genesis GEN5i User Manual page 205

I2679-4.0 en
Fiber Optic Ethernet Specifications
Fiber optic Ethernet
Connectors
SC-Type connectors for dual channel fiber optic data
RJ45 8 contact, female for dual channel standard
Fiber optic
Wavelength 850 nm
Cable type Multimode
Maximum cable length 500 m
(1)
Auto-Detection
(2)
Interface
Copper Half and full duplex with auto detection up to
Fiber Ethernet standards supported: Full duplex, up to
Indicators
(1) At boot time GEN series will check in order the optical network first. (Reboot
and unplug the Fiber optic network to switch back to copper)
(2) It is possible to drive either the Copper or the Fiber optic network separately
but not simultaneously.
1000 Base-SX full duplex, 1 GB/s
1 Ch. in, 1 Ch. out
copper communication
Auto-detects at power-on if copper or fiber
connection used, the fiber connection has priority
if both connections are used.
100 m cable length
10 Base-T
100 Base-TX
1000 Base-T
500 meters link length
1000 Base-SX
Two sets of green LED's for indicating Ethernet
channel operational status:
ACT: indicates channel activity
l
LNK: Indicates Ethernet link status
l
100: Indicates link speed = 100 M-bits
l
1000: Indicates link speed = 1000 M-bits
l
(Gigabit)
GEN5i
205