HBM Genesis GEN5i User Manual page 165

I2679-4.0 en
The External Storage Setup dialog:
The information in this dialog must match the information defined in the
configuration of the connected NAS. Refer to the appendix "Setting up the
iSCSI with Synology
®
using Synology .
Figure 11.15: External Storage Setup dialog (Setup an iSCSI NAS
connected without an Ethernet switch)
A GEN Data acquisition system
B iSCSI Host
C iSCSI Target
GEN Data acquisition system - Network
3
interface:
If you have connected the NAS server to the RJ45 connector of the GEN
series mainframe then select the Standard 1 Gbit Ethernet.
Figure 11.16: Network interface connections/Standard 1 Gbit option
®
NAS" on page 574 when necessary for an example
GEN5i
(See Figure 11.11 - A)
165