Feet; Turning Feet Out - HBM Genesis GEN5i User Manual

98
7.6

Feet

GEN5i is standing in normal operation position on 4 feet. Two positioned at the
rear and two at the front of the instrument. The front feet can be used to lift the
instrument front so the display angle is towards the user. The angle between
display and vertical is about +12° in this position. When a smaller angle is
preferred, use the GEN5i carrying handle (+4°).
7.6.1

Turning feet out

To turn feet out:
1 Put instrument on flat surface.
2 Lift the instrument front.
3 Pull out the front feet by turning the back of the feet towards the front of the
instrument.
4 Gently put down GEN5i front and it will stand on its feet.
Figure 7.17: GEN5i stand on feet out
GEN5i
I2679-4.0 en